Home | Locate Us | Contact Us
 
 
PRODUCTS
1. SOLAR POWER PACK
The power pack set of Inverter, Batteries, Solar panels, and power condition unit (C.C) Solar panels

Available in solar power pack 300W up to 1MW.
MICRO CONTROLLER BASED DIGITAL INVERTERS are designed using latest Technology for better performance, high reliability, in billed Battery boost up Technology and Hybrid charging Technology. (Available in 875VA up to 5KVA)

TECHNICAL SPECIFICATIONS:

No.

 Description

Specification

1. Solar inverter 875VA,1KVA,1.5KVA,2KVA,3KVA & 5KVA
Input Voltage

50V ~ 280V

2. Output Voltage on Inverter Mode

200V ~ 230V + 10% & 50Hz
3. Output Waveform on Inverter Mode

Sine wave or quasi @ full load
4. Indication & Alarm

Audio (Buzzer ) & Visual ( LED Indi. )
Low Battery Audio & Visual
AC Mains Audio & Visual
Overload Audio & Visual
AC Charging Visual
Solar Charging Visual
5. Cooling

Forced cooling by DC fan
6. Operating Condition Operating Temp.
Ambient
0 - 45° C
Relative Humidity 0 - 95%
(non -condensing)
7. SOLAR TUBLER BATTERYS 40Ah,75AH,100Ah,120Ah AND 150Ah
8. SOLAR PANELS 50W,100W,150W,200W AND 250W
2. SOLAR WATER HEATER
There are two types (E.T.C & F.P.C.) of solar heaters available in our company. We introduce the solar water heater using very high end technology in market and it produces maximum temperature by “Evacuated Tube”. In each and every evacuated tube have heat rising reflectors & we also increases its length and quality. We designed the inner and outer tank covered by stainless steel and fulfilled by “PUF Insulation” which are prevents from rust formation and heat loss.

BENEFITS OF SUNCARE SOLAR WATER HEATER
  • Better performance in winter and cloudy days.
  • No scale formation & pipe blockage will occur by using salt & hard water.
  • Compressed PUF insulated storage tank to retain the hot water for more than 48 hrs.
  • Inner tank made of SUS 316L grade surgical steel used in marine application.
ETC (Evacuated Tube COLLECTOR)
 

     LPD

100 LPD, 150 LPD, 200 LPD, 300 LPD AND 500 LPD.

Technical Specifications:
Type of collector   ETC.
Specifications 47x1800 mm.
Number of tube 12,15,18,24,28,35,55.
Frame angle 27 degrees.
Inner tank materials Stainless steel 316L grade
  Insulation     High quality PUF materials.
Tank volume 100Ltr  to 500 Ltr.
Outer tank   Powder coated/ stainless steel.
  Number of persons to use  3-18 persons
FPC (Flat plate collector)
 

     LPD

100 LPD, 200 LPD, 300 LPD AND 500 LPD.

Technical Specifications:
Material & Thickness Stainless Steel – 304/316/GRP/Boiler grade steel.
Type Cylindrical – horizontally assembled.
Size Ø360, Length 1800.
Insulation P U F.40-50mm.
Outer Cladding Pre coated galvanized Steel/Aluminium.
Outer Finishing Pure Polyester Powder Coating finish.
Outer Finish Color White & red or blue combination.
Back up Heater With thermostat control 230V AC.
Tank Supports Fabricated and powder coated M.S. Tube
Tank Testing Factory pressure tested for normal systems is at 2 Kg/cm².
Normal Working pressure of the system Less than 1 Kg/cm².
Interconnection Tank and Collector EPDM Pipe
3. SOLAR PANELS

There are two types (mono crystalline & poly crystalline) of solar photovoltaic panels available in our company.

One of the most common comments that the Solar Choice Energy Brokering team hear from our customers relates to the issue of mono crystalline vs. polycrystalline (or ‘multi crystalline’) solar panels. Although mono crystalline panels had the initial advantage of being seen as the superior technology in the Australian market, as time goes on and both technologies improve, it becomes increasingly apparent that the the quality and reliability of the manufacturer is far more important than which of the two technologies is chosen.

The typical mono crystalline solar cell is a dark black colour, and the corners of cells are usually missing as a result of the production process and the physical nature of mono crystalline silicon. Polycrystalline, on the other hand, is identifiable by its signature light or dark blue colour, but not uniformly so: some patches are lighter than others. 

MONO CRYSTLLINE
Technical Parameters   250W/24V
Typical power (Pmax) W 250
Tolerance % (+ or-) 3
Max power voltage (Vpm) V 29.94
Max power current (Ipm) A 8.35
Open circuit voltage (Voc) V 37.25
Short circuit current (Isc) A 8.95
Max system voltage (Vdc) V 1000
Cell Efficiency % 17.80
Module Efficiency % 15.52
Physical Parameters    
Number of cells No 60
Module length mm 1639
Module width mm 982
Weight Kgs 21
POLY CRYSTALLINE
Technical parameters   100W/
12V
150W/
12V
200W/
24V
250W/24V
Typical power
(Pmax)
W 100 150 200 250
Tolerance % (+or-) 3 (+or-) 3 (+or-) 3 (+ or-) 3
Max power voltage   (Vpm) V 17.7 17.7 29.94 29.94
Max power current    (Ipm) A 5.1 6.2 7.20 8.35
Open circuit voltage  (Voc) V 21.2 21.2 34.50 37.25
Short circuit current  (Isc) A 6 9 7.40 8.95
Max system voltage   (Vdc) V 1000 1000 1000 1000
Cell Efficiency % 7 10 14 17.80
Module Efficiency % 6.52 9.32 12.42 15.52
Physical parameters          
Number of cells No 36 36 60 60
Module length mm 1151 1015 1639 1639
Module width mm 666 970 982 982
Weight Kgs 8.6 11.2 20 21
4. SOLAR STREET LIGHT

Solar street light is own manufacturing of our company. A wide range of LED and CFL based solar street light.

With the dynamic advancement in LED technology and its brightness efficacy exceed traditional light source, LED used in general lighting is an inevitable replacement as it brings many benefit with its advantage in reducing energy consumption.

Since the beginning, SUNCARE has been devoted to promote high brightness LED based lighting solutions.
  Technical Specifications   SC-SSL 027W   SC-SSL 015W

Solar street light available in our company

LED

  • 15W

  • 27W

  • 35W

  • 70W


CFL

  • 15W

  • 18W

  • 22W

  • 36W
Solar panel 100Wp (Poly/Mono) 50Wp (Poly/Mono)
Input Voltage 12V 12V
Current 2.3A 1.25A
Battery 75Ah (Solar Tubular) 40Ah(Solar Tubular)
LED Driver 27W 15W
LED Luminary 27W 15W
Autonomy 2 Days 2 Days
Lumen Output 2880lm 1770lm
Colour Temperature 5500-6500K 5500-6500K
No of LED 24 No’s 12 No’s
Luminary Details Length - 375mm, Breath -
200mm,
Width - 50mm
Length-225mm, Breath - 135mm
Width - 40mm
Life time 50,000 Hours 50,000 Hours
Charge Controller 20A 10A
Pole Details 6Mtr ht, OD- 3', ID-2.5' 5Mtr ht, OD- 2.5”, ID-2”
Battery Box Size 300 X 600 X 350 150 X 300 X 175
Wire Details 2.5 Sq.mm 1.5 Sq.mm
Colour Aluminium Aluminium
Warranty 2 year 2 year
   
5. SOLAR PUMP SYSTEM

A solar-powered pump is a pump running on electricity generated by photovoltaic or the heat from collected sunlight. The operation of solar powered pumps is more economical and has less environmental impact than pumps powered by an electric motor. Solar pumps are useful where grid electricity is unavailable and wind powered pumps do not provide adequate performance. Solar pump system comparatively cost effective because of the free availability of solar energy.

COMPONENTS
  • The pump
  • The controller (adjusting speed and output power according to input from solar panels)
  • An electric motor
  • Solar panels
Solar pump system available in our company
1HP, 2HP, 3HP, 5HP, 7.5HP AND 10HP
Pump controller using maximum Power Point Tracking (MPPT) Technologic.
Specifications:
  • Uses MPPT technology to maximise water delivery at various solar energy levels without battery
  • Water pumped even in morning, evening and in cloudy weather at low speed / flow for over 12 hours per day
  • Can be used for both Monoblock or Submersible pumps
  • You can use existing pump setup so no need to buy new pump
  • Dual Input (Solar + Grid) Preferential Logic
  • Multiple pumps can be connected to single controller
  • Dc Power Meter included
6. SOLAR CHARGE CONTROLLER

MOSFET Technology based controller
Input voltage :  12V
Using blocking diode protection.
Deep discharging protection.
Over load protection.
Cut-off voltage :  14.2 V
Max-solar panels voltage : 23V
Max- solar panels current : 10A
Weight : 250 gr

MOSFET Technology based controller
Input voltage  :  12V or 24V
Using blocking diode protection.
Deep discharging protection.
Over load protection.
Cut-off voltage :  14.2 V
Max-solar panels voltage : 49V
Max- solar panels current : 20A
Weight : 250 gr

MOSFET Technology based controller
Input voltage :  12V or 24V
Using blocking diode protection.
Deep discharging protection.
Over load protection.
AUTOMATIC ON-OFF CONTROLLER
(12 HOURS)

Cut-off voltage :  14.2 V
Max-solar panels voltage : 23V
Max- solar panels current : 10A
Weight : 250 gr

MOSFET Technology based controller
Input voltage :  12V or 24V
Using blocking diode protection.
Deep discharging protection.
Over load protection.
Cut-off voltage :  14.2 V
Max-solar panels voltage : 120V
Max- solar panels current : 80A
Weight : 550 gr

MICRO CONTROLLER BASED controller are designed using latest Technology
Solar Input voltage :  12V to 120V
AC input voltage : 240V
In billed Battery boost up Technology.
Using blocking diode protection.
Deep discharging protection.
Over load protection.
Cut-off voltage :  14.2 V
Max- solar panels current : 80A
Weight : 1.25Kg

 
Home | Company | Products | Services | Projects | Contact Us
Copyright @ 2013 SUNCARE GROUP. All Rights Reserved. Designed By: www.apextec.in